Specifications

Chapter 3 Commands Compatibility RIGOL
Programming Guide for DM3000
3-11
[{MIN|MAX}]
[SENSe:]PERiod:VOLTage:RANGe[:UPPer]
{<voltage_range>|MIN|MAX|DEF}
measurements.
[SENSe:]RESistance:APERture? [MIN|MAX]
[SENSe:]RESistance:APERture
{<second>|MIN|MAX|DEF}
Query and set the aperture time for 2-wire
resistance measurements.
[SENSe:]RESistance:NPLC? [{MIN|MAX}]
[SENSe:]RESistance:NPLC
{<PLCs>|MIN|MAX|DEF}
Query and set the aperture time for 2-wire
resistance measurements. Note that the input value
and return value are both multiple of PLC.
[SENSe:]RESistance:NULL[:STATe]?
[SENSe:]RESistance:NULL[:STATe]
{ON|OFF}
Query and set the NULL state for 2-wire resistance
measurements.
[SENSe:]RESistance:NULL:VALue?
[{MIN|MAX}]
[SENSe:]RESistance:NULL:VALue
{<value>|MIN|MAX}
Query and set the NULL value for 2-wire resistance
measurements.
[SENSe:]RESistance:RANGe:AUTO?
[SENSe:]RESistance:RANGe:AUTO <mode>
Query and set the automatic range state for 2-wire
resistance measurements.
[SENSe:]RESistance:RANGe[:UPPer]?
[{MIN|MAX}]
[SENSe:]RESistance:RANGe[:UPPer]
{<range>|MIN|MAX|DEF}
Query and set the range for 2-wire resistance
measurements.
[SENSe:]RESistance:RESolution?
[{MIN|MAX}]
[SENSe:]RESistance:RESolution
{<resolution>|MIN|MAX|DEF}
Query and set the resolution for 2-wire resistance
measurements.
[SENSe:]VOLTage:AC:BANDwidth?
[{MIN|MAX}]
[SENSe:]VOLTage:AC:BANDwidth
{<filter>|MIN|MAX|DEF}
Query the bandwidth for AC voltage measurements
and return the bandwidth with one of the three
values: 3, 20 or 200.
Select the bandwidth for AC voltage measurements
from 3, 20 or 200.
[SENSe:]VOLTage:AC:NULL[:STATe]?
[SENSe:]VOLTage:AC:NULL[:STATe]
{ON|OFF}
Query and set the NULL state for AC voltage
measurements.
[SENSe:]VOLTage:AC:NULL:VALue?
[{MIN|MAX}]
[SENSe:]VOLTage:AC:NULL:VALue
Query and set the NULL value for AC voltage
measurements.