Specifications

RIGOL Chapter 3 Commands Compatibility
Programming Guide for DM3000
3-12
{<value>|MIN|MAX}
[SENSe:]VOLTage:AC:PEAK:STATe?
[SENSe:]VOLTage:AC:PEAK:STATe {ON|OFF}
Query and set the peak measurement state for AC
voltage measurements.
[SENSe:]VOLTage:AC:RANGe:AUTO?
[SENSe:]VOLTage:AC:RANGe:AUTO <mode>
Query and set the automatic range state for AC
voltage measurements.
[SENSe:]VOLTage:AC:RANGe[:UPPer]?
[{MIN|MAX}]
[SENSe:]VOLTage:AC:RANGe[:UPPer]
{<range>|MIN|MAX|DEF}
Query and set the range for AC voltage
measurements.
[SENSe:]VOLTage[:DC]:APERture?
[{MIN|MAX}]
[SENSe:]VOLTage[:DC]:APERture
{<second>|MIN|MAX|DEF}
Query and set the aperture time for DC voltage
measurements.
[SENSe:]VOLTage[:DC]:APERture:ENABle?
[SENSe:]VOLTage[:DC]:APERture:ENABle
{ON}
Query the state of the aperture time for DC voltage
measurements.
Set the aperture time for DC voltage measurements
as “ON”.
[SENSe:]VOLTage[:DC]:IMPedance:AUTO?
[SENSe:]VOLTage[:DC]:IMPedance:AUTO
{ON |1}
Query the input impedance mode for DC voltage
measurements.
Set the input impedance mode for DC voltage
measurements as “ON” or “1”.
NOTE: the DM3000 can only support this command
but not for auto input impedance mode.
[SENSe:]VOLTage[:DC]:NPLC? [{MIN|MAX}]
[SENSe:]VOLTage[:DC]:NPLC
{<PLCs>|MIN|MAX|DEF}
Query and set the aperture time for DC voltage
measurements. Note that the input value and return
value are both multiple of PLC.
[SENSe:]VOLTage[:DC]:NULL[:STATe]?
[SENSe:]VOLTage[:DC]:NULL[:STATe]
{ON|OFF}
Query and set the Null state for DC voltage
measurements.
[SENSe:]VOLTage[:DC]:NULL:VALue?
[{MIN|MAX}]
[SENSe:]VOLTage[:DC]:NULL:VALue
{<value>|MIN|MAX}
Query and set the Null value for DC voltage
measurements.
[SENSe:]VOLTage[:DC]:PEAK:STATe?
[SENSe:]VOLTage[:DC]:PEAK:STATe
{ON|OFF}
Query and set the peak measurement state for DC
voltage measurements.
[SENSe:]VOLTage[:DC]:RANGe:AUTO?
Query and set the automatic range state for DC