Specifications

Chapter 3 Commands Compatibility RIGOL
Programming Guide for DM3000
3-13
[SENSe:]VOLTage[:DC]:RANGe:AUTO
<mode>
voltage measurements.
[SENSe:]VOLTage[:DC]:RANGe[:UPPer]?
[{MIN|MAX}]
[SENSe:]VOLTage[:DC]:RANGe[:UPPer]
{<range>|MIN|MAX|DEF}
Query and set the range for DC voltage
measurements.
[SENSe:]VOLTage[:DC]:RESolution?
[{MIN|MAX}]
[SENSe:]VOLTage[:DC]:RESolution
{<resolution>|MIN|MAX|DEF}
Query and set the resolution for DC voltage
measurements.
SAMPle:TIMer? [{MIN|MAX}]
SAMPle:TIMer {<interval>|MIN|MAX}
Query and set the sample interval for timed
sampling.
SYSTem:BEEPer:STATe?
SYSTem:BEEPer:STATe <mode>
Query and set the state of the beeper.
SYSTem:BEEPer[:IMMediate]
This command issues a single beep immediately
from the instrument.
SYSTem:COMMunicate:ENABle? <interface>
This command can do nothing for the DM3000,
however you can send it.
SYSTem:COMMunicate:ENABle <mode>,
<interface>
This command can do nothing for the DM3000;
however you can send it.
SYSTem:COMMunicate:GPIB[:SELF]:ADDRes
s?
SYSTem:COMMunicate:GPIB[:SELF]:ADDRes
s {<address>}
Query and set the GPIB address.
SYSTem:COMMunicate:LAN:BSTatus?
Queries the LAN interface state of the instrument.
SYSTem:COMMunicate:LAN:CONTrol?
This command acquires the number of interfaces
that connected to network for Sockets.
SYSTem:COMMunicate:LAN:DDNS?
SYSTem:COMMunicate:LAN:DDNS <mode>
Query and set the state of the dynamic DNS.
SYSTem:COMMunicate:LAN:DHCP?
SYSTem:COMMunicate:LAN:DHCP <mode>
Query and set the state of the DHCP.
SYSTem:COMMunicate:LAN:DNS?
SYSTem:COMMunicate:LAN:DNS
"<address>"
Query and set the address of the static DNS.
SYSTem:COMMunicate:LAN:GATEway?
[{CURRent|STATic}
SYSTem:COMMunicate:LAN:GATEway
Query and set the default gateway of the
instrument.