Specifications

RIGOL Chapter 3 Commands Compatibility
Programming Guide for DM3000
3-14
"<address>"
SYSTem:COMMunicate:LAN:HOSTname?
[{CURRent|STATic}]
SYSTem:COMMunicate:LAN:HOSTname
"<name>"
Query and set the current host name of the
instrument.
SYSTem:COMMunicate:LAN:IPADdress?
[{CURRent|STATic}]
SYSTem:COMMunicate:LAN:IPADdress
"<address>"
Query and set the current IP (Internet Protocol)
address of the instrument.
SYSTem:COMMunicate:LAN:MAC?
Queries the MAC (Media Access Control) address -
link layer address.
SYSTem:COMMunicate:LAN:SMASk?
[{CURRent|STATic}]
SYSTem:COMMunicate:LAN:SMASk
"<mask>"
Query and set the current subnet mask of the
instrument.
SYSTem:LANGuage?
SYSTem:LANGuage {EN|CH}
Query and set the display language (Chinese or
English) of the instrument.
SYSTem:VERSion?
Queries the standard SCPI (Standard Commands for
Programmable Instruments version) number that
was used by the instrument.
SYSTem:ERRor?
Reads and clears one error from the instrument's
error queue.
TRIGger:COUNt? [{MIN|MAX}]
TRIGger:COUNt
{<count>|MIN|MAX|INFinity}
Query and set the number of triggers of the
instrument.
TRIGger:DELay? [{MIN|MAX}]
TRIGger:DELay {<second>|MIN|MAX|DEF}
Query and set the delay between the trigger signal
and the first measurement.
TRIGger:DELay:AUTO?
TRIGger:DELay:AUTO {ON|OFF|1|0}
Query and set the state of the auto trigger delay.
TRIGger:SLOPe?
TRIGger:SLOPe <slope>
Query and set the external trigger type of the
instrument.
TRIGger:SOURce?
TRIGger:SOURce <source>
Query and set the current trigger source of the
instrument.