Datasheet

Temperature Coefficient per℃ (Output Percentage + Offset)
Voltage
Current
Stability
[3]
±(Output Percentage + Offset)
Voltage
Current
Voltage Programming Control Speed (1% within the total variation range)
Rise Full Load
No Load
Fall Full Load
No Load
OVP/OCP
Accuracy ±(Output
Percentage + Offset)
Activation Time
Mechanical
Dimensions
Weight
Power
AC Input
(50Hz to 60Hz)
I/O
USB Device
USB Host
LAN
RS232
Environment
Working Temperature
Cooling Method
0.01%+3mV
0.02%+3mA
0.02% + 1mV
0.1% + 1mA
CH1:<92ms CH2:<11ms
CH1:<30ms CH2:<15ms
CH1:<90ms CH2:<17ms
CH1:<486ms CH2:<154ms
0.5%+0.5V/0.5%+0.5A
1.5ms（OVP≥ 3V）
<10ms（OVP<3V和OCP）
239mm(W) x 157mm(H) x 418mm(D)
10kg
100Vac+10%，115Vac+10%，230Vac+10%（maximum 250VAC）
1
1
1
1
Full Rated Value Output: 0℃ to 40℃
Under Relatively Higher Temperature: the output current decreases linearly to 50% at the
highest temperature 55℃ or the input fuse is broken.
Fan Cooling
Resolution
Programming Voltage
Current
Readback
Voltage
Current
Display
Voltage
Current
Transient Response Time
Less than 50μs for output to recover to within 15mV following a change in output current from full load to half load or vice versa.
Command Processing Time
[2]
<100ms
8V/10A：1mV
60V/1A：10mV
8V/10A：1mA
60V/1A：0.1mA
60V/1A：1mV
8V/10A：1mV
60V/1A：0.1mA
8V/10A：1mA
60V/1A：10mV
8V/10A：1mV
60V/1A：0.1mA
8V/10A：1mA
Note:
[1] The accuracy parameters are acquired via calibration under 25℃ after 1-hour warm-up.
[2] The maximum time required for the output to change accordingly after receiving the APPLy and SOURce commands.
[3] The variation of the output within 8 hours after 30-minute warm-up when the load circuit and environment temperature are constant.
Annual Accuracy
[1]
(25℃±5℃) ±(Output Percentage + Offset)
Programming Voltage
Current
Readback Voltage
Current
8V/10A：<0.05%+10mV
60V/1A：<0.1%+25mV
0.2%+10mA
8V/10A：0.05%+5mV
60V/1A：<0.1%+25mV
0.15%+10mA