Quick Start Guide

RIGOL

DP800A Quick Guide 7

7. Output Terminals

(1) (2) (3) (4)

(1) Output the voltage and current of CH1.

(2) This terminal is connected to the instrument chassis and ground wire (power

cord ground terminal) and is in grounded state.

(3) Output the voltage and current of CH2.

(4) Output the voltage and current of CH3.

Connection methods of the output terminal:

Method 1:

Connect the test lead to A of the output terminal.

Method 2:

Rotate the outer nut of the output terminal counterclockwise and connect the

test lead to B of the output terminal; then, rotate the outer nut of the output

terminal clockwise. This connection method can eliminate the error caused by

the resistance of the output terminal.

Note: Connect the positive terminal of the test lead with the (+) terminal of the

channel output and connect the negative terminal of the test lead with the (-)

terminal of the channel output.