User Guide

RIGOL Chapter 6 MATH and Measurement
6-28 MSO1000Z/DS1000Z User’s Guide
Statistic Function
Make statistic and display the current, average, minimum (or standard deviation) and
maximum (or count) values of at most 5 measurement items that are turned on last.
Press Measure  Statistic to turn the statistic function on or off. When the
statistic function is enabled, press Stat.Sel. to select “Extremum” or “Difference”
measurement. When “Extremum” is selected, minimum and maximum values are
displayed. When “Difference” is selected, standard deviation and count values are
displayed. Press Measure  Reset Stat. to clear the history data and make
statistic again.
Extremum Measurement
Difference Measurement
Measurement Result Display Type
The measurement results can be displayed at the bottom of the screen in two font
sizes. Press Measure  Font Size to select “Normal” or “Large”. The display effects
are as shown in the figures below.
Normal (Statistic Function Disabled)
Normal (Statistic Function Enabled)
Large (Statistic Function Disabled)
Large (Statistic Function Enabled)