Instructions

Chapter 2 Command System RIGOL
DS1000Z-E Programming Guide 2-97
:MASK:X
Syntax :MASK:X <x>
:MASK:X?
Description Set or query the horizontal adjustment parameter in the pass/fail test mask. The default
unit is div.
Parameter
Name
Type
Range
Default
<x>
Real
0.02 to 4, the step is 0.02 within the range
0.02
Return
Format
The query returns the horizontal adjustment parameter in scientific notation.
Example
:MASK:X 0.28 /*Set the horizontal adjustment parameter to 0.28div*/
:MASK:X? /*The query returns 2.800000e-01*/
:MASK:Y
Syntax :MASK:Y <y>
:MASK:Y?
Description Set or query the vertical adjustment parameter in the pass/fail test mask. The default unit
is div.
Parameter
Name
Type
Range
Default
<y>
Real
0.04 to 5.12, the step is 0.04 within the range
0.96
Return
Format
The query returns the vertical adjustment parameter in scientific notation.
Example
:MASK:Y 0.36 /*Set the vertical adjustment parameter to 0.36div*/
:MASK:Y? /*The query returns 3.600000e-01*/
:MASK:CREate
Syntax
:MASK:CREate
Description Create the pass/fail test mask using the current horizontal adjustment parameter and
vertical adjustment parameter.
Explanation This command is valid only when the pass/fail test is enabled (:MASK:ENABle) and is not
in the run state (:MASK:OPERate).
Related
Commands
:MASK:X
:MASK:Y
:MASK:PASSed?
Syntax
:MASK:PASSed?
Description
Query the number of passed frames in the pass/fail test.
Return
Format
The query returns an integer.