Instructions

RIGOL Chapter 2 Command System
2-182 DS1000Z-E Programming Guide
:WAVeform:XORigin?
Syntax
:WAVeform:XORigin?
Description Query the start time of the waveform data of the channel source currently selected in the
X direction.
Explanation  The return value is related to the current data reading mode:
In NORMal mode, the query returns the start time of the waveform data displayed on
the screen.
In RAW mode, the query returns the start time of the waveform data in the internal
memory.
In MAX mode, the query returns the start time of the waveform data displayed on the
screen when the instrument is in running status; the query returns the start time of
the waveform data in the internal memory when the instrument is in stop status.
 The unit is related to the current channel source:
When the channel source is CHANnel1 or CHANnel2, the unit is s.
When the channel source is MATH and the operation type is FFT, the unit is Hz.
Return
Format
The query returns the XORigin in scientific notation.
Example
:WAVeform:XORigin? /*The query returns -6.000000e-06*/
Related
Commands
:WAVeform:SOURce
:WAVeform:XREFerence?
:WAVeform:XREFerence?
Syntax
:WAVeform:XREFerence?
Description
Query the reference time of the specified channel source in the X direction.
Return
Format
The query returns 0 (namely the first point on the screen or in the internal memory).
Related
Command
:WAVeform:SOURce
:WAVeform:YINCrement?
Syntax
:WAVeform:YINCrement?
Description Query the waveform increment of the specified channel source in the Y direction. The unit
is the same as the current amplitude unit.
Explanation The return value is related to the current data reading mode:
In NORMal mode, YINCrement = VerticalScale/25.
In RAW mode, YINCrement is related to the Verticalscale of the internal waveform and the
Verticalscale currently selected.
In MAX mode, YINCrement = VerticalScale/25 when the instrument is in running status;
YINCrement is related to the Verticalscale of the internal waveform and the Verticalscale
currently selected when the instrument is in stop status.
Return
Format
The query returns the YINCrement in scientific notation.
Example
:WAVeform:YINCrement? /*The query returns 8.000000e-03*/
Related
Command
:WAVeform:SOURce