Instructions

RIGOL Chapter 2 Command System
2-26 DS1000Z-E Programming Guide
Explanation  This command is only valid when the auto cursor mode is selected. You can select
the auto cursor measurement mode using the
:CURSor:MODE command.
 The 37 waveform parameters are listed below (see the detailed introduction
in
:MEASure Commands). The parameters can be enabled by the :MEASure:ITEM
command.
Period, Frequency, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, +Pulses,
-Pulses, +Edges, -Edges, tVmax, tVmin, +Rate, +Rate, Delay
1→2, Delay
1→2, Phase 1→2, Phase 1→2, Vmax, Vmin, Vpp, Vtop, Vbase, Vamp,
Vupper, Vmid, Vlower, Vavg, Vrms, Overshoot, Preshoot, Area, Period Area, Period
Vrms, Variance.
Return
Format
The query returns OFF, ITEM1, ITEM2, ITEM3, ITEM4, or ITEM5.
Example :CURSor:AUTO:ITEM ITEM3 /*Use auto cursor to measure ITEM3*/
:CURSor:AUTO:ITEM? /*The query returns ITEM3*/
:CURSor:AUTO:AX?
Syntax
:CURSor:AUTO:AX?
Description
Query the horizontal position of cursor A in auto cursor measurement.
Explanation  The horizontal and vertical positions of the cursor are defined by the pixel
coordinate of the screen. The pixel coordinate of the screen ranges from (0,0) to
(600,400). Wherein, (0,0) is located at the left top corner of the screen and
(600,400) is located at the right bottom corner of the screen. The horizontal pixel
range is from 0 to 600 and the vertical pixel range is from 0 to 400.
 In auto cursor measurement, cursor A of X type is not required for some of the
measurement items. At this point, the query returns 4294967295.
Return
Format
The query returns an integer between 5 and 594.
:CURSor:AUTO:BX?
Syntax
:CURSor:AUTO:BX?
Description
Query the horizontal position of cursor B in auto cursor measurement.
Explanation  The horizontal and vertical positions of the cursor are defined by the pixel
coordinate of the screen. The pixel coordinate of the screen ranges from (0,0) to
(600,400). Wherein, (0,0) is located at the left top corner of the screen and
(600,400) is located at the right bottom corner of the screen. The horizontal pixel
range is from 0 to 600 and the vertical pixel range is from 0 to 400.
 In auto cursor measurement, cursor B of X type is not required for some of the
measurement items. At this point, the query returns 4294967295.
Return
Format
The query returns an integer between 5 and 594.