Instructions

Chapter 2 Command System RIGOL
DS1000Z-E Programming Guide 2-35
:DECoder1:THREshold:AUTO? /*The query returns 0*/
Related
Commands
:DECoder<n>:THREshold:CHANnel1
:DECoder<n>:THREshold:CHANnel2
:DECoder<n>:CONFig:LABel
Syntax :DECoder<n>:CONFig:LABel <bool>
:DECoder<n>:CONFig:LABel?
Description Turn on or off the label display function, or query the status of the label display function.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<bool> Bool {{1|ON}|{0|OFF}} 1|ON
Explanation When this function is turned on, the bus label will be displayed at the lower-upper side of
the bus (when the bus display is turned on).
Return
Format
The query returns 1 or 0.
Example
:DECoder1:CONFig:LABel ON /*Turn on the label display function*/
:DECoder1:CONFig:LABel? /*The query returns 1*/
:DECoder<n>:CONFig:LINE
Syntax :DECoder<n>:CONFig:LINE <bool>
:DECoder<n>:CONFig:LINE?
Description
Turn on or off the bus display function, or query the status of the bus display function.
Parameter
Name
Type
Range
Default
<n> Discrete {1|2} --
<bool> Bool {{1|ON}|{0|OFF}} 1|ON
Explanation When this function is enabled, the bus will be displayed on the screen. You can send
the
:DECoder<n>:POSition command to adjust the vertical display position of the bus.
Return
Format
The query returns 1 or 0.
Example
:DECoder1:CONFig:LINE OFF /*Turn off the bus display function*/
:DECoder1:CONFig:LINE? /*The query returns 0*/
:DECoder<n>:CONFig:FORMat
Syntax :DECoder<n>:CONFig:FORMat <bool>
:DECoder<n>:CONFig:FORMat?
Description Turn on or off the format display function, or query the status of the format display
function.