Instructions

RIGOL Chapter 2 Command System
2-74 DS1000Z-E Programming Guide
:LAN Commands
Command List:
 :LAN:DHCP
 :LAN:AUToip
 :LAN:GATeway
 :LAN:DNS
 :LAN:MAC?
 :LAN:MANual
 :LAN:INITiate
 :LAN:IPADdress
 :LAN:SMASk
 :LAN:STATus?
 :LAN:VISA?
 :LAN:APPLy
:LAN:DHCP
Syntax :LAN:DHCP <bool>
:LAN:DHCP?
Description Turns on or off the DHCP configuration mode; or queries the on/off status of the
current DHCP configuration mode.
Parameter
Name
Type
Range
Default
<bool>
Bool
{{1|ON}|{0|OFF}}
1|ON
Explanation  When the three IP configuration types (DHCP, Auto IP, and Static IP) are all
turned on, the priority of the parameter configuration from high to low is
"DHCP", "Auto IP", and "Static IP". The three IP configuration types cannot be
all turned off at the same time.
 When DHPC is valid, the DHCP server in the current network will assign the
network parameters (such as the IP address) for the oscilloscope.
Return
Format
The query returns 1 or 0.
Example
:LAN:DHCP ON /*Enables DHCP configuration mode.*/
:LAN:DHCP? /*The query returns 1.*/
:LAN:AUToip
Syntax :LAN:AUToip <bool>
:LAN:AUToip?
Description Turns on or off the Auto IP configuration mode; or queries the on/off status of the
current Auto IP configuration mode.
Parameter
Name
Type
Range
Default
<bool>
Bool
{{1|ON}|{0|OFF}}
1|ON