User Manual
Table Of Contents
RIGOL Chapter 1 Disassembly and Assembly
1-4 DS1000Z-E Service Guide
Disassemble the Rear Panel
Figure 1-2 Disassemble the Rear Panel
Part Description:
① 2 screws (M3x10 torx pan head screw, used for fastening the handle)
② 2 screws (M3x8 torx pan head self-tapping screw, used for fastening the
brackets of the rear panel)
Disassembly Steps:
1. Use the T10 screwdriver to remove 2 screws (①) that secure the handle.
2. Use the T10 screwdriver to remove 2 screws (②) at the bottom of the rear
panel.
3. Remove the rear panel gently.
Rear Panel
①
②
②
Handle