User Manual

RIGOL Chapter 1 Disassembly and Assembly
1-8 DS1000Z-E Service Guide
Disassemble the Keypad Board and LCD
Figure 1-6 Disassemble the Keypad Board and LCD
Part Description:
① 2 screws (M3x6 torx flat head countersunk screw, used for fastening the left
keyboard)
② 5 screws (M3x6 torx flat head countersunk screw, used for fastening the main
keyboard)
③ 4 screws (M3x6 torx pan head combination screw, used for securing the LCD)
Disassembly Steps:
1. Use the T10 screwdriver to remove 2 screws (①) that secure the left keyboard.
2. Use the T10 screwdriver to remove 5 screws (②) that secure the main
keyboard.
3. Remove the left keyboard cable and main keyboard cable from the main board,
and take off the left keyboard and main keyboard gently.
4. Use the T10 screwdriver to remove 4 screws (③) that secure the LCD. Remove
the screen line from the main board. Take off the LCD gently.
②
③
Left
Keyboard
Main Keyboard
①
①
LCD
③
③
③
②
②
②
②