User Manual

RIGOL Chapter 1 Disassembly and Assembly
1-10 DS1000Z-E Service Guide
Disassemble the Main Board
Figure 1-7 Disassemble the Main Board
Part Description:
① 10 screws (M3x6 torx pan head combination screw, used for fastening the
main board to the metal front panel); please remove them according to their
actual positions).
Disassembly Steps:
1. Use the BNC socket wrench to remove the 3 nuts and washers at the BNC
ports on the metal front panel.
2. Use the T10 screwdriver to remove 10 screws (①) that secure the main
board and the metal front panel.
3. Take off the main board gently.
① X10