User Guide
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- DS2000 Series Overview
- Document Overview
- 1 Quick Start
- 2 To Set the Vertical System
- 3 To Set the Horizontal System
- 4 To Set the Sample System
- 5 To Trigger the Oscilloscope
- 6 To Make Measurements
- 7 Protocol Decoding
- 8 Reference Waveform
- 9 Pass/Fail Test
- 10 Waveform Record
- 11 Display Control
- 12 Store and Recall
- 13 System Function Setting
- 14 Remote Control
- 15 Troubleshooting
- 16 Specifications
- 17 Appendix
- Index
8 Reference Waveform RIGOL
DS2000 User’s Guide
8-1
8 Reference Waveform
In actual testing process, the waveform being tested can be compared with the
reference waveform to judge the causes of failures.
The contents of this chapter:
To Enable REF Function
To Set the Color
To Select REF Source
To Save to Internal Memory
To Adjust REF Waveform Display
To Export to Internal or External Memory
To Import from Internal or External Memory