User Guide
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- DS2000 Series Overview
- Document Overview
- 1 Quick Start
- 2 To Set the Vertical System
- 3 To Set the Horizontal System
- 4 To Set the Sample System
- 5 To Trigger the Oscilloscope
- 6 To Make Measurements
- 7 Protocol Decoding
- 8 Reference Waveform
- 9 Pass/Fail Test
- 10 Waveform Record
- 11 Display Control
- 12 Store and Recall
- 13 System Function Setting
- 14 Remote Control
- 15 Troubleshooting
- 16 Specifications
- 17 Appendix
- Index
RIGOL 12 Store and Recall
DS2000 User’s Guide
12-10
Disk Management
Press Storage Disk.Manage to turn on the disk management interface as
shown in the figure below and use to select the desired disk. The disk currently
selected is displayed in green and press down
to open the disk selected.
Execute the following operations through the disk management menu:
To Select File Type
To Create a New File or Folder
To Delete a File or Folder
To Rename a File or Folder
To Clear the Local Memory










