User Guide
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- DS2000 Series Overview
- Document Overview
- 1 Quick Start
- 2 To Set the Vertical System
- 3 To Set the Horizontal System
- 4 To Set the Sample System
- 5 To Trigger the Oscilloscope
- 6 To Make Measurements
- 7 Protocol Decoding
- 8 Reference Waveform
- 9 Pass/Fail Test
- 10 Waveform Record
- 11 Display Control
- 12 Store and Recall
- 13 System Function Setting
- 14 Remote Control
- 15 Troubleshooting
- 16 Specifications
- 17 Appendix
- Index
RIGOL 13 System Function Setting
DS2000 User’s Guide
13-10
Screen
When the oscilloscope enters the idle state and holds for a certain period of time, the
screen saver program will be enabled.
Press Utility System Screen to open the screen saver setting menu.
“Default” means using the icon RIGOL as the screen saver icon.
Press Time to select the screen saver time. When “OFF” is selected, the screen saver
program is disabled. The screen saver time can be set to 1 min, 2 min, 5 min, 15 min,
30 min, 45 min, 60 min, 2 hour or 5 hour.