User manual

RIGOL 10 Waveform Record
DS2000A User’s Guide
10-14
4. Create Mask
Mask is the templet used in waveform analysis. Press Create Mask to
immediately apply the mask (X Mask and Y Mask) currently created.
Users can store the current test mask into the internal Flash memory or external USB
storage device or load the test mask file (*.pf) stored in the internal Flash memory or
external USB storage device into the internal memory.
Press Save to enter the file store interface. Store the test mask file to internal or
external memory by referring to the introduction in
Store and Recall.
Press Load to enter the file recall interface. Load the test mask into the internal
memory of the instrument by referring to the introduction in
Store and Recall.