User manual

RIGOL
DS2000A User’s Guide
XIV
DS2000A Series Overview
DS2000A is a high-performance digital oscilloscope developed on the basis of the
Ultra Vision technique. DS2000A, featuring rather deep memory depth, ultra-wide
dynamic range, superb waveform capture rate and all-round trigger functions as well
as hardware waveform record function and good display effect, is an invaluable
debug instrument in various fields (such as communication, cosmonautics, defense,
embedded system, computer, research and education) and is the one with the most
complete functions and most outstanding specifications among the digital
oscilloscopes with lower than 300 MHz bandwidth.
Main features:
 300MHz, 200 MHz, 100 MHz and 70 MHz bandwidth.
 Ultra Vision technique.
 2 GSa/s maximum real-time sample rate.
 50,000 wfms/s (dots display) waveform capture rate.
 Real-time hardware waveform recording, waveform playback, record open
(constant on) and waveform analysis functions. Up to 65,000 frames of
waveform can be recorded.
 56 Mpts maximum memory depth (option) and 14 Mpts standard memory
depth.
 256 degree gray scale display.
 Low noise floor, 500 μV/div to 10 V/div ultra-wide vertical dynamic range.
 8.0 inches, WVGA (800*480) 160,000 color TFT LCD, with ultra-wide screen,
vivid picture, low power consumption and long service life.
 Adjustable brightness of analog channel waveform.
 Auto setting of waveform display (AUTO).
 16 kinds of trigger functions including multiple protocol triggers.
 Standard parallel decoding and multiple serial decoding options.
 Auto measurements of 24 waveform parameters and measurement functions
with statistic.
 Precise delayed sweep function.
 Built-in FFT function.
 Pass/Fail test function.
 Multiple waveform math operation functions.
 Built-in dual-channel and 25 MHz signal generator function (only applicable to
DS2000A-S).
 Standard configuration interfaces: USB Device, USB Host, LAN and GPIB