User manual

RIGOL
DS2000A User’s Guide
XVI
Document Overview
1 Quick Start
Provide information about preparations
before using the instrument and a brief
introduction of the instrument.
2 To Set the Vertical System
Introduce the functions of the vertical
system of the oscilloscope.
3 To Set the Horizontal System
Introduce the functions of the horizontal
system of the oscilloscope.
4 To Set the Sample System
Introduce the functions of the sample
system of the oscilloscope.
5 To Trigger the Oscilloscope
Introduce the trigger mode, trigger coupling,
trigger holdoff, external trigger and various
trigger types of the oscilloscope.
6 To Make Measurements
Introduce how to make math operation,
cursor measurement and auto
measurement.
7 Protocol Decoding
Introduce how to decode the input signal
using those common protocols.
8 Reference Waveform
Introduce how to compare the input
waveform with the reference waveform.
9 Pass/Fail Test
Introduce how to monitor the input signal
using the Pass/Fail test.
10 Waveform Record
Introduce how to analyze the input signal
using waveform record.
11 Display Control
Introduce how to control the display of the
oscilloscope.
12 Signal Source
Introduce how to use the built-in signal
generator.
13 Store and Recall
Introduce how to store and recall the
measurement result and the setting of the
oscilloscope.
14 System Function Setting
Introduce how to set the remote interface
and system-related functions.
15 Remote Control
Introduce how to control the oscilloscope
remotely.
16 Troubleshooting
Introduce how to deal with common failures
of the oscilloscope.
17 Specifications
Provide the specifications and general
specifications of the oscilloscope.
18 Appendix
Provide common information such as options
and accessories.