User Guide

RIGOL
DS6000 User’s Guide
13-18
To Print the Waveform
To Connect the Print Device
DS6000 oscilloscope supports normal and PictBridge printers and you can set the
print parameters to print the current screen image. The connection modes of
different print devices are different. Use the USB Host interface to connect normal
printer and use the USB Device interface to connect the PictBridge printer.
After the printer is connected, you need to set the USB device type and the print
mode of the oscilloscope.
 Press UTIL  IO Setting  USB Device to select “Auto Detect” or
“PictBridge” (when PictBridge printer is connected).
 Press UTIL  Print Set  Print Mode to select the print mode to “Normal” or
“PictBridge” according to the printer currently connected.
To Connect Normal Printer
To Connect PictBridge Printer