User Guide
RIGOL
DS6000 User’s Guide
2-5
Table 2-1 Probe Attenuation Coefficient
Menu
Attenuation coefficient
0.001X
0.01X
0.1X
1X
10X
100X
1000X
1:1000
1:100
1:10
1:1
10:1
100:1
1000:1
For “DiffProbe”, this menu blanks off.
3. Front
When using “DiffProbe”, the differential probe always have different handle front
accessories to be used to measure single-end signal and differential signal.
Press this softkey to select “10Single” or “10Diff” according to the signal to be
tested.
4. SignalType
When using “DiffProbe”, press this softkey to select “Single” or “Diff” according to
the type of the signal to be tested.
5. ProbeCal
When using “DiffProbe”, you can calibrate the attenuation coefficient and the
zero point offset of the probe.
Press this softkey to turn on the probe calibration menu:
Press Start to start the probe calibration.
Press Cancel to cancel the calibration operation.