Data Sheet

RIGOL

DSA1000&DSA1000A Options&Accessories

4. Installation Procedures

A PH2 Phillips Screwdriver is recommended. Note that the instrument will be

damaged or installed in rack incorrectly if the installation is not proper. Thus, only

authorized operators can execute the installation operation.

1) Install the right and left palate: aim the detents of right and left plate at the

openings on support board and insert respectively, then fix them using six M4

screws.

2) Place the instrument: Remove the battery* by pressing the button on top of it,

and then place the instrument into the confined position on the Support Board.

*Note: the battery is only supplied in China.