Data Sheet

RIGOL

DSA1000&DSA1000A Options&Accessories

Advanced Measurement Functions

Option DSA1000-AMK provides plenty of advanced measurement functions including

T-Power (Time domain Power), ACP (Adjacent Channel Power), Chan Pwr (Channel

Power), OBW (Occupied Bandwidth), EBW (Emission Bandwidth), C/N Ratio, Harmo

Dist (Harmonic Distortion), TOI (Third Order Intermodulation) and Pass/Fail. The

measure mode can be Single or Continuous and you can control the measurement

status: Restart, Pause or Resume.

Pressing the front panel key Meas, the corresponding menu will appear on the right

of the screen. Press Meas Fctn and choose a measurement function. The screen will

be divided into two windows. The upper one is for basic measure, displaying sweep

trace, and the lower one shows the measurement results.

1. T-Power (Time domain Power)

Enables the Zero Span Mode and calculates the power within time domain. The

measurable power types are Peak, Average and RMS.

Measured Result Parameters

Measure Control

Start Line Stop Line