User manual

RIGOL Chapter 2 Front Panel Operation
User’s Guide for DSA700 Series
2-98
option.
1) Option Info
Press Option Info to view the installation status of options.
2) License Info
Press License Info to view the license key of the option installed.
3) Install
Press Install and use the numeric keypad and the knob on the front
panel to enter the option license. For example,
DASXZJWFDAMPGSN7VAW9HTM8YCCA. After all the characters are
entered, press OK to finish the input. The analyzer identifies the entered
license key and matches it to the corresponding option automatically. At
this point, the option is installed and activated (Y is displayed in the Active
column).
Tips:
You can also install the option by controlling the spectrum analyzer remotely.
1. Build the communication between the analyzer and PC using USB, LAN or
GPIB (option) interface. About the connection method, please refer to the
descriptions of "Remote Control".
2. Send the :SYSTem:LKEY <license key> command, for
example, :SYSTem:LKEY DASXZJWFDAMPGSN7VAW9HTM8YCCA, the
analyzer identifies the received license key and matches it to the
corresponding option automatically. At this point, the option is installed and
activated (Y is displayed in the Active column).