User manual

Chapter 2 Front Panel Operation RIGOL
User’s Guide for DSA700 Series
2-99
TX1000 (Option)
DSA700 supports RIGOL TX1000 series spectrum analyzer RF Demo Kit. Press
this key to open the TX1000 control panel as shown in the figure below.
Figure 2-29 TX1000 control panel
Note: This function is available only when the analyzer is connected with the
TX1000 option. For the detailed application of TX1000, please refer to
TX1000_ApplicationNote .
Sanitation
Press Sanitation to clear all data set by user and restore them to factory settings.
 The user data saved in the NVRAM and NorFlash are restored to factory settings.
 HOST NAME, IP address and password in LXI are restored to factory settings.