User manual

RIGOL Chapter 2 Front Panel Operation
User’s Guide for DSA700 Series
2-46
 When "Repeat" is selected, the result is the arithmetic average of the
current N (N is specified in "Avg Num") measurement results.
3. Integ BW
Set the frequency width of the channel to be tested and the power of the
channel is the power integral within this bandwidth. You can use the numeric
keys, knob or direction keys to modify this parameter.
4. CH Pwr Span
Set the frequency range of the channel. This span which is the same with the
span of the analyzer is the frequency range of the sweep. Modifying this
parameter will change the span of the analyzer.
 The channel power span is related to the integration bandwidth and the
range available is from integration bandwidth to integration
bandwidth×20.
 You can use the numeric keys, knob or direction keys to modify this
parameter.