Datasheet

ManualsBrandsRIGOL ManualsLaboratory Test EquipmentDSA815Spectrum analyzer, spectrum analyzerBandwidth (RBW) 100 Hz - 1 MHz

RIGOL TECHNOLOGIES, INC.

DSA800 series is one of RIGOL's compact size, light

weighteconomic spectrum analyzers, the digital IF technology

guarantees its reliability and performance to meet the most

demanding RF applications.

• All-DigitalIFTechnology

• 9kHz-1.5GHzFrequencyRange

• Upto-135dBmDisplayedAverageNoiseLevel(DANL)

• -80dBc/Hz@10kHzOsetPhaseNoise

• TotalAmplitudeUncertainty<1.5dB

• 100HzMinimumResolutionBandwidth(RBW)

• 1.5GHzTrackingGenerator(DSA815-TG)

• AdvancedMeasurementfunctions(Option)

• EMIFilter&Quasi-PeakDetectorKit(Option)

• VSWRMeasurementKit(Option)

• CompleteConnectivity:LAN,USBhost,USBdevice,GPIB(option)

• 8InchWVGA(800x480)Display

• CompactSize,Lightweightdesign

No.1

DSA800

Summary of content (8 pages)

PAGE 1
No.1 DSA800 • All-Digital IF Technology • 9 kHz - 1.5 GHz Frequency Range • Up to -135dBm Displayed Average Noise Level (DANL) • -80dBc/Hz @ 10kHz Oset Phase Noise • Total Amplitude Uncertainty < 1.5dB • 100Hz Minimum Resolution Bandwidth (RBW) • 1.
PAGE 2
Unique widescreen display, friendly interface and easy-to-use operations Product Dimensions: Width X Height X Depth = 361.6 mm x 178.8 mm x 128 mm Weight：4.25kg（9.4lbs） Benefits of Rigol's all digital IF design 1. The ability to measure smaller signals: on the basis of this technology, the IF filter enables smaller bandwidth settings, which greatly reduce the displayed average noise level. 2.
PAGE 3
Features and Benefits Distinguish the two nearby signals clearly with the 100Hz RBW Compare the spectrums when change the RBW settings with different color trace Zero span to demodulate the AM signal Readout the Spectrum Peak values with the Peak table function Measure lower than -130dBm signal with the standard Preamplifier VSWR Measureasurement EMI Measurement (EMI Filter & QuasiPeak & Pass_Fail) The GUI to control the RF Demo Kit (Transmitter) directly RIGOL 2
PAGE 4
RF Demo Kit （TX1000） DSA Accessories Package (DSA Utility Kit) VSWR Bridge (VB1020/VB1030) Advanced Measurement Kit （DSA800-AMK） DSA PC Software (Ultra Spectrum) USB to GPIB Interface Converter for Instrument （USB-GPIB） Tracking Generator (DSA815-TG) Rack Mount Kit （DSA800-RMSA） Specifications Specifications are valid after 30 minute warm up time with a valid calibration. Typical value and nominal value are defined as follows.
PAGE 5
Amplitude Measurement Range Range Maximum rated input level DC Voltage CW RF Power Max. Damage Level 10 MHz to 1.5 GHz DANL to +20 dBm RF attenuation = 30dB 50 V +20 dBm (100mW) +30 dBm (1W) Note: When input level >+25dBm, the protection switch will be on. Displayed Average Noise Level (DANL) 0 dB RF Attenuation, RBW=VBW=100 Hz, Sample Detector, Trace Average ≥ 50 100 kHz to 1 MHz <-90 dBm, DANL typ. -110 dBm (Preamplifier Off) 1 MHz to 1.5 GHz <-110 dBm+6 x (f/1GHz) dB, typ.
PAGE 6
-50 dBm 30 MHz +40 dBm +10 dBm 1dB Gain Compression Total Power at Input Mixer >0 dBm fc ≥ 50MHz, preamplifier off Note: Mixer power level (dBm) = input power (dBm) – input attenuation (dB).
PAGE 7
USB Connector Protocol USB Host USB Device B plug Version 2.0 A plug Version 2.0 Connector Protocol General Specifications Display Type Resolution Size Colors TFT LCD 800 x 480 pixels 8 inch 64k Printer Supported Protocol PictBridge Remote Control USB LAN Interface IEC/IEEE Bus (GPIB) with opt.
PAGE 8
Ordering Information Mode Standard Accessories Options Description Order Number Spectrum Analyzer, 9 kHz to 1.5 GHz (with preamplifier) DSA815 S p e c t r u m A n a l y z e r, 9 k H z t o 1 .