Specifications

RIGOL
DS6000 User’s Guide
5-27
Press SamplePoint and use to modify the parameter with the step as 1% and
the range is from 5% to 95%.
Trigger Mode:
Press Sweep to select the Trigger Mode (page 5-3) under this trigger type as auto,
normal or single. The corresponding status light of the current trigger mode turns on.
Trigger Setting:
Press Set Up to set the trigger parameter (trigger holdoff) under this trigger type.
Trigger Level:
Use TRIGGER LEVEL to modify the level. For details, please refer to the
description of “Trigger level” on page 5-9.