Specifications

RIGOL
DS6000 User’s Guide
6-10
Advanced Operation
DS6000 provides advanced operation function that allows user-defined operation
functions. Press MATH  Operate  Advance  Expression  On, and the
editing window as shown in the figure below pops up on the screen.
Turn to select any item ( if they are currently available for selection) in “Channel”,
“Function”, “Variable”, “Operator” and “Figure”, then press the knob and the item
selected will de displayed in the entry box on the right of the “Expression”.
During the expression edit, you can press Delete to delete the character currently at
the left of the cursor and press Clear to delete all the characters in the entry box at
any time.
After finishing the expression edit, press Apply and the oscilloscope will operate
according to the expression you set and display the result. Note that, after “Apply” is
pressed down, the Expression menu will be automatically set to “OFF” but the
preset expression will still be displayed at the bottom of the screen for your reference.
You can also press Invert to turn the invert display of the operation results on or off.
The following are descriptions of the contents in the editing window: