Specifications

RIGOL
DS6000 User’s Guide
6-12
variable. After setting the “Step” or pressing this softkey, turn the knob to
modify this parameter. The range available is from -9.9999 to 9.9999.
 Exponent: press this softkey to set the numeric values of the exponents
with 10 as the mantissa in the variables. The range is from -9 to 9.
For example, the following setting means set Variable1 to 6.1074× 10
8
.
Variable: Variable1
Mantissa: 6.1074
Exponent: 8
5. Operator
Please refer to the following table to get the functions of each operator.
Table 6-4 Operator
Operator
Function
+ - * /
Arithmetic operators: add, subtract, multiply and divide
( )
Parentheses: used to increase the priority of the operation
enclosed in the parentheses
< > <= >=
== !=
Relationship operators: lower than, greater than, lower
than or equal to, greater than or equal to, equal to, not
equal to
!( || &&
Logic operator: NOT, OR, AND
 In division operation, when the divisor is 0, the result of the division is
treated as 0.
 In logic operation, when the voltage of the analog channel is greater than 0,
it is considered as logic “1”, otherwise logic “0”.
6. Figure
Select from figure 0 to 9, decimal point and character E. Where, character E is
used to refer to the nth power of 10. For example, 1.5E3 means 1.5 multiplies
the 3th power of 10.