Specifications

RIGOL
DS6000 User’s Guide
7-9
Press SCLK to turn on the clock line setting interface.
 Press Channel to select any channel (CH1-CH4) as the clock channel.
 Press Slope to set to sample MISO and MOSI on the rising edge or falling
edge of SCLK.
 Press Threshold to set the threshold of the clock channel.
3. MISO Setting
Press MISO to turn the MISO data line setting interface.
 Press Channel to select any channel (CH1-CH4) as the MISO channel.
When “OFF” is selected, this data line is not set.
 Press Polarity to set the polarity of the MISO data line to positive polarity
or negative polarity.
 Press Threshold to set the threshold of the MISO data line.
4. MOSI Setting
Press MOSI to enter the MOSI data line setting interface.
 Press Channel to select any channel (CH1-CH4) as the MOSI channel.
When “OFF” is selected, this data line is not set.
 Press Polarity to set the polarity of the MOSI data line to positive polarity
or negative polarity.
 Press Threshold to set the threshold of the MOSI data line.
5. Data Bits Setting
Press Data Bits to set the number of bits of each frame of data. The range
available is from 4 to 32.
6. Endian Setting
Press Endian to select “LSB” or “MSB” and the default is “MSB”.
7. Display-related Setting
Press Ary to select the display format of the bus as: Hex, Decimal, Binary or
ASCII.
Press Offset and use to adjust the vertical display position of the bus.
Press BusStatus to turn the bus display on or off.
8. Error Expressions during Decoding
When the data in one frame of SPI is less than the data bits, the data is filled