Specifications

RIGOL
DS6000 User’s Guide
8-3
To Select REF Source
Press Current and use to select any reference channel (Ref1-Ref10) that has
been turned on and then press Source to specify a reference source (CH1-CH4,
MATH) for this channel.
To Save to Internal Memory
Press Save to save the waveform (screen region) in the specified source to internal
memory as reference waveform and display it on the screen. Note that this operation
only saves the reference waveform to the volatile memory and it is not saved after
power-off.
To Adjust REF Waveform Display
To adjust the specified reference waveform in Current:
Press REF to set the oscilloscope to REF function state. Then, use VERTICAL
SCALE to adjust the vertical scale of the reference waveform and use VERTICAL
POSITION to adjust the vertical position of the reference waveform.
Press Reset and the reference waveform returns to the position where the source
channel waveform is located when the Reset softkey is pressed down.