Specifications

RIGOL
DS6000 User’s Guide
10-9
Analysis Based on Trace
Press the Analyze softkey and select “Trace”. Then, set the templet used in analysis
based on trace through the method below.
1. Trace
Press the Trace softkey to select the creation method of analysis templet.
 Current Frame: select the current frame as the analysis templet.
 Average: select the average of all the frames of this analysis as the analysis
templet.
 User: users can define a frame as the analysis templet.
2. Setup Templet
Press the Setup Templet softkey to configure the templet immediately. After
the analysis starts, the scope compares each frame with the templet to compute
the difference value and determines whether error frame exists by comparing
the difference value with the threshold currently set.