Specifications

RIGOL
DS6000 User’s Guide
12-3
Storage Type
Press SAVE  Storage to select the desired storage type. The default is “Traces”.
The store and recall descriptions of each type are as follows:
1. Traces
Save the data in internal or external memory in “*.trc” format.
 Internal storage: only save the data of the selected channel, and at recall,
the data will be displayed on the screen directly. At most 10 trace files (from
LocalTrace0.trc to LocalTrace9.trc) can be stored.
 External storage: save the data of all the channels turned on in different
formats. At recall, the data will be displayed on the screen directly.
2. Waveforms
Save the waveform data in internal or external memory in “*.wfm” format. At
most 10 waveform files (from LocalWfm0.wfm to LocalWfm9.wfm) can be
stored in internal memory. The stored files contain the waveform data of the
four analog channels and the main setting information of the oscilloscope and all
the data can be recalled.
3. Setups
Save the settings of the oscilloscope in internal or external memory in “*.stp”
format. At most 10 setting files (from LocalSetup0.stp to LocalSetup9.stp) can
be stored in internal memory. The stored settings can be recalled.
4. Picture
Save the screen image in external memory in “*.bmp”, “*.png”, “*.jpeg” or “tiff”
format. You can specify the file name and saving directory and save the
corresponding parameter file (*.txt) under the same directory using the same
file name. The recall of image and reference files is not supported.
After seleting this type:
Press the PicType softkey to select the desired storage format.
Press the Para.Save softkey to enable or disable the parameter save function.