Specifications

RIGOL
DS6000 User’s Guide
12-8
External Store and Recall
Before using external store and recall, make sure that a USB flash device is
connected correctly. External storage supports all the types of files in Storage but in
recall, “Picture” and “CSV” are not supported.
1. Save the specified type of file in the external USB flash device.
1) Connect the signal to the oscilloscope and obtain stable display.
2) Press SAVE  Storage to select “CSV” and press Save to turn on the
interface as shown in Figure e. Use to select “Disk E” and press to
turn on the USB flash device (Figure f).
Figure e
3) As shown in Figure f, use to select the desired storage position. Enable
to store under the root directory or in a certain folder under the root
directory of the USB flash device.