Specifications

RIGOL
DS6000 User’s Guide
12-9
Figure f
4) After the storage position is selected, press New to turn on the interface as
shown in Figure g. Refer to the descriptions in “To Create a New File or
Folder” to create a new file name.
Figure g
5) Press OK to execute the saving operation.
2. Load the specified type of file in the external USB flash storage device.
1) Press SAVE  Storage to select “Traces” and then press Load to turn on
the interface as shown in Figure h. Use to select “Disk E” and press
to turn on the USB flash device (Figure i).