Specifications

RIGOL
DS6000 User’s Guide
13-3
IP Configuration Type (DHCP)
The configuration type of the IP address can be DHCP, auto IP or static IP. In
different IP configuration type, the configuration mode of the network parameters
such as the IP address is different.
Press Config Mode and use to select “DHCP”. Then press to select this type.
When DHPC type is valid, the DHCP server will assign the network parameters such
as the IP address for the oscilloscope.
IP Configuration Type (Auto IP)
Press Config Mode and use to select “Auto IP”. Then press to select this
type. When the auto IP type is valid (DHCP is turned off), the “Gate” and “DNS”
menus are added to the right side of the screen. In auto IP mode, the oscilloscope
will get the IP address ranging from 69.254.0.1 to 169.254.255.254 and the subnet
mask 255.255.0.0 automatically according to the current network configuration.
IP Configuration Type (Static IP)
Press Config Mode and use to select “Static IP”. Then press to select this
type. When this type is valid (DHCP and auto IP are turned off), the “IP Address”,
“Subnet Mask”,“Gate” and “DNS” menus will be added on the right of the screen. At
this point, users can define their own network parameters of the oscilloscope such as
the IP address.
1. Set the IP Address
The format of the IP address is nnn.nnn.nnn.nnn, where, the range of the first