Specifications

RIGOL
DS6000 User’s Guide
13-8
Power-off Recall
You can set the system configuration to be recalled when the oscilloscope is powered
on again after power-off.
Press UTIL  System  Power On to select “Last” (default) or “Default”.
 Last: return to the setting of the system at last power-off.
 Default: return to the factory setting of the system.
System Time
The system time is displayed at the lower right corner of the screen in “mm:ss
(minute: second)” format. When printing or storing a waveform, the file output will
contain this time information.
Press UTIL  System  System Time  System Time to turn on the setting
interface as follows:
In the figure, the item in green (e.g. 2010) is the item that can be modified currently.
Use to modify and press to complete the input. The order of time
modifications is: year (2010) → month (05) → date (06) → hour (18) → minute
(51)→ second (59). The setting range of each item conforms to the convention: