Specifications

RIGOL
DS6000 User’s Guide
1-25
9. Trigger Type
Display the currently selected trigger type and trigger condition setting.
Different labels are displayed when different trigger types are selected.
For example: represents triggering on the rising edge in “Edge” trigger.
10. Trigger Source
Display the trigger source currently selected (CH1-CH4, EXT, EXT/5 or AC
Line). Different labels are displayed when different trigger sources are
selected and the color of the trigger parameter area will change accordingly.
For example: denotes that CH1 is selected as the trigger source.
11. Trigger Level
 at the right of the screen is the trigger level label and the trigger
level value is displayed at the upper-right corner of the screen.
 When Using TRIGGER LEVEL to modify the trigger level, the
trigger level value will change with the up and down of .
Note that in slope trigger, there are two trigger level labels ( and ).
For detailed information, please refer to the introduction in “Vertical
Window” on page 5-13.
12. CH1 Vertical Scale
 Display the voltage value per grid of CH1 waveform vertically.
 Use VIRTICAL SCALE to modify this parameter.
 The following labels will be provided according to the current channel
setting: channel coupling (e.g. ), bandwidth limit (e.g. ) and input
impedance (e.g. ). The situations of CH2, CH3 and CH4 are similar to
this.
13. CH2 Vertical Scale
 Display the voltage value per grid of CH2 waveform vertically.
 Use VIRTICAL SCALE to modify this parameter.
 The following labels will be provided according to the current channel
setting: channel coupling, bandwidth limit and input impedance.
14. CH3 Vertical Scale
 Display the voltage value per grid of CH3 waveform vertically.