User`s guide

RIGOL Chapter 2 Front Panel Operations
2-60 DSG3000 User’s Guide
To Set the System Parameters
Set the system-related parameters.
Language
DSG3000 supports Chinese/English menus, help, interface display and
Chinese/English input methods.
Press System  Language to select the desired language (“English” or “中文”).
Reset
Press System  Reset to perform “Power On”, “Preset Type” and “Save Preset”
operations.
1. Power On
Press Power On to select “Last” or “Preset”.
 When “Last” is selected, the system setting before the last power-off will be
loaded automatically at power-on.
 When “Preset” is selected, the setting defined in Preset Type will be
loaded automatically at power-on.
2. Preset Type
Press Preset Type to select “Factory” or “User”.
 When Power On is set to “Preset”, the specified preset type will be loaded
at power-on.
 After power-on, press Preset at the front panel under any operation
interface to recall the specified preset type.
3. Save Preset
Press Save Preset to store the current system state as user-defined setting in
the internal non-volatile memory. When Preset Type is set to “User”, the
current configuration is loaded by recalling “preset”.
NOTE: When Preset Type is set to “Factory”, this menu is grayed out and
disabled.