User`s guide

Chapter 6 Specifications RIGOL
DSG3000 User’s Guide 6-5
Level Sweep
Operating modes
Step sweep (equally spaced level steps)
List sweep (the list of arbitrary level steps)
Sweep modes
Single, continuous
Sweep range
Full level range
Sweep shape
Triangle, ramp
Step change
Linear
Number of points
Step sweep
2 to 65535
List sweep
1 to 6001
Dwell time range
20ms to 100s
Triggering
Auto, trigger key, external, bus (GPIB, USB, LAN)
Internal Modulation Generator (LF)
Internal Modulation Generator (LF)
Waveforms
Sine, square, triangle, ramp, sine sweep
Frequency range
Sine, sine sweep
0.1Hz to 1MHz
Square
0.1Hz to 20kHz
Triangle, ramp
0.1Hz to 100kHz
Resolution
0.01Hz
Frequency error
Same as RF reference source
Output voltage
[1]
Setting range
1mV to 3V
Resolution
1mV
Output impedance
50Ω (nom.)
Sine sweep
Sweep modes
Single, continuous
Sweep range
Frequency range of LF
output
Sweep time
1ms to 1000s
Sweep shapes
Triangle, ramp
Triggering
Auto, trigger key, external,
bus (GPIB, USB, LAN)
NOTE: [1] Measurement in high-impedance state.