User`s guide

Chapter 1 Quick Start RIGOL
DSG3000 User’s Guide 1-17
To Use DSG3000 for the First Time
To Connect the Power Supply
Please connect the signal generator to AC power supply using the power cord
supplied in the accessories as shown in the figure below. The AC power supplies
specification of this signal generator is 100-240 V, 45-440 Hz. The power
consumption of the instrument cannot exceed 60 W. When the signal generator is
connected to AC power supply via this connector, the instrument select the correct
voltage range automatically and users do not need to select the voltage range
manually.
Figure 1-6 To Connect the Power Supply
CAUTION
To avoid electric shock, make sure that the instrument is correctly
grounded.