User`s guide

Chapter 2 Front Panel Operations RIGOL
DSG3000 User’s Guide 2-21
To Set the Modulation Frequency
Press AM  Source to select “Int” or “Int & Ext” modulation source; press Freq to
set the frequency of the modulating waveform.
 Use the numeric keyboard or knob to input the desired frequency value.
 For sine waveforms, the range of the modulation frequency is from 100 mHz to 1
MHz.
 For square waveforms, the range of the modulation frequency is from 100 mHz
to 20 kHz.
NOTE: When “Ext” modulation source is selected, this menu is grayed out and
disabled.