User`s guide

Chapter 2 Front Panel Operations RIGOL
DSG3000 User’s Guide 2-53
NOTE: If you want to select “Record csv” or “AmpCal” file type, please pre-install the
power meter option (PMC-DSG3000), otherwise the menus are grayed out and
disabled.
File Type
Format
Suffix
Explanation
Train List
BIN
.TRN
The current train list can be saved by the format
of BIN, and you can recall it when required.
Train csv
CSV
.CSV
The current train list can be saved by the format
of CSV. You can copy (when saving to D disk) or
save it to USB storage device. After that the file
can be opened and viewed by a spreadsheet
program on the computer.
Flatness
BIN
.FLA
The current flatness list can be saved by the
format of BIN and you can recall it when required.
Flat csv
CSV
.CSV
The current flatness list can be saved by the
format of CSV. You can copy (when saving to D
disk) or save it to USB storage device. After that
the file can be opened and viewed by a
spreadsheet program on the computer.
Swp List
BIN
.SWP
The current sweep list can be saved by the format
of BIN and you can recall it when required.
Swp csv
CSV
.CSV
The current sweep list can be saved by the format
of CSV. You can copy (when saving to D disk) or
save it to USB storage device. After that the file
can be opened and viewed by a spreadsheet
program on the computer.
State
BIN
.STA
The current system state can be saved by the
format of BIN.
Record csv
CSV
.CSV
The current data recorded by the power meter
can be saved by the format of CSV. You can copy
(when saving to D disk) or save it to USB storage
device. After that the file can be opened and
viewed by a spreadsheet program on the
computer.
AmpCal
BIN
.ALC
The amplitude difference of sweep list measured
by power meter can be saved by the format of
BIN.
Arb
BIN
.ARB
The arbitrary waveform file saved by the format of
BIN. You can load the file when required.
Tips: You can generate the file of csv format using a spreadsheet program on the
computer. Then you can open the file to edit directly the required parameters in the
excel table, and save it to USB storage device. In addition, you can also load the file
to RF signal generator when required.