User`s guide

RIGOL Chapter 2 Front Panel Operations
2-56 DSG3000 User’s Guide
(c2) Chinese Input Mode 2
Figure 2-4 Filename Input Interface
3. Input the filename
Input the new filename in the filename input interface. The length of the
filename cannot exceed 28 English characters or numbers (or 14 Chinese
characters).
 Input English filename
a) Press to switch to English input mode. You can use to
switch between uppercase and lowercase. At this point, the
corresponding label is displayed at the lower-right corner of the
filename input interface.
b) Press the key of the desired letter. At this point, the letters available are
displayed in the letter selection area. Press this key continuously or
the left/right direction keys or rotate the knob until the background of
the desired letter turns red. Then, press Enter to input the letter.
c) Use the above method to input the other letters in the filename.
 Input Chinese filename
a) Press to switch to Chinese input mode. At this point, the
corresponding label is displayed at the lower-right corner of the
filename input interface.
b) Press the key of the first letter of the pinyin of the desired Chinese
character and the pinyins available are displayed in the pinyin
Chinese Characters Entered Chinese Character Selection Area Operation Tips