Instructions

RIGOL Chapter 2 Command System
2-106 DSG800 Programming Guide
:SYSTem:PRESet
Syntax :SYSTem:PRESet
Description
Reset the instrument to the preset state (the settings (FACtory or USER) defined by
the :SYSTem:PRESet:TYPE command).
Explanation
Sending this command is equivalent to pressing Preset at the front panel, namely
recalling the default values or user-preset values related to this key.
Related
Commands
:SYSTem:POWer:ON:TYPE
:SYSTem:PRESet:TYPE
:SYSTem:PRESet:TYPE
Syntax :SYSTem:PRESet:TYPE FACtory|USER
:SYSTem:PRESet:TYPE?
Description Select the preset type of the system.
Query the preset type of the system.
Parameter
Name
Type
Range
Default
FACtory|USER
Discrete
FACtory|USER
--
Explanation  When the power-on setting is set to "Preset", the instrument loads the specified
preset type ("Factory" or "User") after start-up.
 Pressing Preset at the front panel will recall the specified preset type.
 When the preset type is set to "User", you can use the :SYSTem:PRESet:SAVE
command to save the current system configuration.
Return Format The query returns FACTORY or USER.
Example
:SYST:PRES:TYPE USER
:SYST:PRES:TYPE?
Related
Commands
:SYSTem:POWer:ON:TYPE
:SYSTem:PRESet:SAVE
:SYSTem:PRESet:SAVE
Syntax
:SYSTem:PRESet:SAVE
Description Save the user setting.
Explanation  Using this command can save the current system configuration as user-defined
setting in the internal non-volatile memory.
 When Preset Type is set to "User" (use the :SYSTem:PRESet:TYPE command),
this configuration will be loaded when recalling "Preset" (use
the
:SYSTem:POWer:ON:TYPE command).
 When Preset Type is set to "Factory", this command is invalid.
Related
Commands
:SYSTem:POWer:ON:TYPE
:SYSTem:PRESet:TYPE