Instructions

Chapter 2 Command System RIGOL
DSG800 Programming Guide 2-5
:MMEMory:DATA:IQ
Syntax
:MMEMory:DATA:IQ <file_name>,<flag>,<num>{,<i0>,<q0>…<in>,<qn>}
Description Save and download IQ waveform data to the instrument.
Parameter
Name
Type
Explanation
<file_name> ASCII string
The name of the wavetable file downloaded
into the instrument.
<flag> Discrete
When the IQ data file exceeds 64kB, you
should download the file packets separately.
0 denotes downloading the first data packet;
1 denotes downloading the subsequent data
packets;
2 denotes downloading the last data packet
and output the IQ waveform.
<num>
Integer
The number of IQ data pairs.
{,<i0>,<q0>
…
<in>,<qn>}
Decimal
number
IQ data pairs. Each data (for example, i0)
cannot exceed two bytes.
Explanation When sending the command, you should add the data block (start with #9 flag)
which denotes the total length of the IQ data before <i0>,<q0>…<in>,<qn>. For
example, #9000000011 denotes that the total length of the IQ data is 11 bytes. The
value is calculated by the formula "the number of bytes of the IQ data pairs + the
number of bytes occupied by the commas".
Example :MMEM:DATA:IQ test1,0,2,#9000000011 1,10,11,20
/*Save the two pairs of IQ data currently edited with the filename "test1" (the total
length of "1,10,11,20" is 11 bytes and is expressed by #9000000011) and download
the IQ data to DSG800*/
:MMEMory:DATA:IQ:LIST
Syntax :MMEMory:DATA:IQ:LIST?
Description
Query the wavetable files currently stored in the root directory (D: disk) of the
instrument.
Return Format The query returns the wavetable file list in the format of "wavetable filename
(*.arb),file size". For example, wave2.arb,2180,wave3.arb,2516,.