Data Sheet
Number of points
Step sweep 2 to 65535
List sweep 1 to 6001
Dwell time 20 ms to 100 s
Trigger mode Auto, key, external, bus (USB, LAN)
Spectral Purity
[3]
Harmonic CW mode, 1 MHz ≤ f ≤ 3.6 GHz, level ≤ +13 dBm < -30 dBc
Non-harmonic
CW mode, level > -10 dBm, carrier offset > 10 kHz
100 kHz ≤ f ≤ 1.5 GHz < -60 dBc, < -70 dBc (typ.)
1.5 GHz < f ≤ 3.6 GHz < -54 dBc, < -64 dBc (typ.)
SSB phase noise
[4]
CW mode, carrier offset = 20 kHz, 1 Hz measurement bandwidth
100 kHz ≤ f ≤ 1.5 GHz < -105 dBc/Hz, < -112 dBc/Hz (typ.)
1.5 GHz < f ≤ 3.6 GHz < -99 dBc/Hz, < -106 dBc/Hz (typ.)
Residual FM
CW mode, RMS value at f = 1 GHz
0.3 kHz to 3 kHz < 10 Hz rms, < 5 Hz rms (typ.)
0.03 kHz to 20 kHz < 50 Hz rms, < 10 Hz rms (typ.)
Note:
[1] Time from receipt of SCPI command or trigger signal to within 0.1 ppm of nal frequency (nal frequency ≥ 227.5 MHz) or within
100 Hz (nal frequency < 227.5 MHz).
[2] N is a factor used to help dene certain specications within the manual.
[3] Applicable to instrument without IQ function.
[4] Available for software version 00.01.07 or above.
Measured at 0 dBm, Harmonics vs.frequency Measured SSB phase noise